Solar Charge Controller Specifications
| SKU | KIS-SCD1230 |
|---|---|
| MPN | SCD1230 |
| Controller technology | PWM |
| Supported battery voltage (V) | 12, 24 |
| Max charging current (A) | 30.0 |
| Max PV open-circuit voltage (V) | 52.0 |
| Max PV power at 12V (W) | 360.0 |
| Max PV power at 24V (W) | 720.0 |
Show all specifications (27)Show fewer specifications
| Supported battery chemistries | AGM, Gel, Flooded lead-acid |
|---|---|
| PV voltage-limit conditions | Manual max PV open-circuit voltage: 26V for a 12V battery, 52V for a 24V battery. All starred manual voltage settings double at 24V. |
| PV power rating conditions | Manufacturer reference solar-panel ratings; observe model voltage and current limits. |
| Automatic battery-voltage detection | Yes |
| Adjustable charging settings | Yes |
| Lithium charging presets | Yes |
| Temperature compensation | Yes |
| Built-in display | Yes |
| Load output available | Yes |
| Load output rated current (A) | 30.0 |
| Low-voltage load disconnect | Adjustable |
| PV terminal wire capacity | Screw terminals; 6 AWG max, 10 AWG minimum required by manual |
| Battery terminal wire capacity | Screw terminals; 6 AWG max, 10 AWG minimum required by manual |
| Load terminal wire capacity | Screw terminals; 6 AWG max, 10 AWG minimum required by manual |
| Min operating temperature (°C) | -40.0 |
| Max operating temperature (°C) | 60.0 |
| Protection features | Battery reverse polarity, PV reverse polarity, Load overcurrent, PV overcurrent, Overtemperature |
| Product warranty (years) | 2.0 |
| Warranty conditions | Two-year limited warranty to original purchaser, subject to KISAE terms. |
Description
The KISAE SCD1230 provides up to 30A of PWM solar charging for 12V or 24V batteries, with automatic system-voltage detection and a digital display for battery and charging information.
Select AGM, gel, flooded or configurable charging settings for the installed battery. A separate 30A load output supports adjustable low-voltage disconnect and programmable on/off timers.
Reference solar-array ratings are 360W at 12V and 720W at 24V. The manual specifies a maximum PV open-circuit voltage of 26V at 12V or 52V at 24V; check cold-weather array voltage before installation.

